Shark GI435 Manuel d'utilisateur télécharger pdf

GI435N 55

TECHNICAL SPECIFICATIONS: 120 Volts, 60 Hz., 1600 Watts

OWNER’S GUIDE

1 Stainless Steel Soleplate

2 Water Inlet Door

3 Atomizer Spray Button

4 Electronic Temperature Control

5 Spray Nozzle

6 Variable Steam/Self-Clean

Control

7 X-Tended Steam Burst

™

/ Steam

Burst Button

8 Water Level Window

9 Pivot Cord

10 Fabric Settings

11 Temperature Indicators

12 Power Light

13 Auto-Off Light

14 Anti-Drip Function (not shown)

BEFORE FIRST TIME USE

1 Before using your iron for the ﬁrst time, please remove all the packaging material.

2 When you turn on the iron for the ﬁrst time it might emit an odor for the ﬁrst ten

minutes. This is because the materials used in making the iron are heating up. The

odor is safe and should not re-occur after the initial heating.

USING YOUR IRON

3 Fill water carefully into the water tank without going over “Max” line. Make sure the

water inlet cover is closed to avoid spilling.

4 Plug in the iron into any 120V AC

polarized electrical outlet.

5 Set the desired fabric/temperature

by pressing the Electronic

Temperature Control.

6 The temperature indicator light on

the LED Display Panel will ﬂash when

the iron is heating up. The green light

will stop ﬂashing and stay on when the iron

reaches the preset temperature.

7 Turn the variable steam control to select high or low steam setting. Select “0” on the

steam control for dry ironing. You can now start ironing.

8 Use the steam burst/X-tended steam burst button to remove stubborn wrinkles. Turn

the button counter-clockwise to the burst of steam position (for quick bursts of steam);

or turn the button clockwise to the X-tended steam burst position (for prolonged bursts

of steam). Press the button in the steam burst position once or several times if in

the X-tended steam burst position to prime the pump. Allow an interval of 3 seconds

between each burst. Overuse of the steam burst may cause water spitting or weak

steam performance.

9 The steam burst feature also works in the vertical position. This is especially useful to

remove wrinkles from hanging clothes, delicate garments and other fabrics. Hold the

iron in the upright position several inches away from the article.

10 Use the atomizer spray to moisten the fabric to tackle tough wrinkles, if necessary.

ANTI-DRIP FEATURE

11 The anti-drip feature is built in to this iron. It prevents water spitting when the

temperature is too low.

12 Steam cannot be produced if the soleplate is not hot enough. It may result in water

spitting or leaking from the soleplate. The anti-drip feature reduces water dripping and

leaking when ironing at low temperatures.

ELECTRONIC MULTI POSITION AUTO-OFF

13 This iron is equipped with an electronic auto-off feature that switches the iron off if it

has been idle in the sideways, ﬂat or upright positions for 7-9 minutes.

14 The auto-off light will ﬂash in red on the LED display when the iron is in auto-off mode.

To turn the iron back on, just gently rock the iron back and forth several times until the

“Power ON” green light is re-illuminated. Reset the temperature to the desired setting;

wait for the green light to stop ﬂashing. The iron might have to warm up for a minute if

the auto-off feature was activated for an extended time.

SELF-CLEANING

15 Fill the water tank to the “MAX” level. Do not overﬁll.

16 Stand the iron on its heel, standing up on a protected surface and plug into the

electrical outlet

17 Set the Electronic Temperature Controls to “•••” setting. Wait until the green light

stops ﬂashing. The iron is now on the preset temperature.

18 Hold the iron horizontally over the sink. Turn and hold the steam control all the way to

the right to the SELF CLEAN position.

19 Move the iron back and forth. Boiling water and steam will now be ejected from the

holes in the soleplate. Use caution when doing this as the water and the steam are hot

enough to cause burns.

20 Continue step 19 until the impurities and scale are washed away.

21 Empty any excess water from the tank. Don’t touch the hot surfaces, water or steam

because injury may occur.

22 Turn the steam control to “0”.

23 Place the iron in upright position and let it cool down.

USEFUL TIPS

24 Read all garment care labels before you start ironing. You can also test the

temperature of the iron on a hem or an inside seam.

25 Iron similar fabrics together and in sequence of synthetic ﬁbers acrylic, nylon, silk/

wool, polyester, and cotton/linen. This will reduce the need to adjust the temperature

frequently.

IRONING GUIDE

FEATURES

STORAGE AND CARE

26 Always turn the variable steam control to “0” after you have emptied the water tank.

27 Allow the iron to cool down before putting it away.

28 Place the iron in the upright position during heating up, cooling down and storage.

29 Avoid any sharp material contacting the soleplate.

30 Every two weeks, clean the exterior of the iron with a damp cloth and wipe dry.

31 If you use spray starch, wipe the soleplate occasionally with a soft, damp cloth to

prevent deposit build-up.

32 If the iron hasn’t been used in a few weeks, hold the iron horizontally and allow

steaming for 2 minutes before ironing.

ALWAYS REMEMBER

33 Unplug the iron from the electrical outlet before pouring water into the iron.

34 Always empty the water in the iron after each use.

35 Never iron or steam clothes while they are being worn.

36 Be very careful when ﬁlling the iron with water. Injuries may occur if the hot metal

parts, hot water or steam are contacted.

TROUBLE SHOOTING

This appliance has a polarized plug (one blade is wider than the other).

As a safety feature, this plug will ﬁt into a polarized outlet only one way.

If the plug does not ﬁt fully into the outlet, reverse the plug. If it still

does not ﬁt, contact a qualiﬁed electrician. Do not attempt to defeat this

safety feature.

10 11

The iron doesn’t

heat up

An odor is being

emitted from the

new iron or small

particles are

coming out

Iron doesn’t

steam

Water droplets

coming from

steam vents.

Iron should be plugged into a 120V AC electric outlet only.

Make sure the plug is securely in the socket.

Temperature setting might be too low.

Try turning to a higher setting.

Auto-off feature is activated.

This is normal.

Follow the instructions for ﬁrst-time use and allow iron to steam

through 2-3 ﬁllings and press the steam burst button occasionally

to eliminate small white particles.

Water tank may be empty or water level is very low. Add water.

Make sure the fabric/temperature setting and the variable steam

control are correctly set. For maximum steam, set “MAX” on steam

control and the temperature setting should be set on “•••.”

Steam control is set on “0.”

The soleplate is not hot enough and the anti-drip feature switches

off the steam. Always allow the iron to reach the selected

temperature with the variable steam control setting at “0.” For

more steam, turn temperature dial to a higher setting and the

steam control to “MAX.”

If the temperature setting and steam control settings are correct

and there is no steam, gently move the iron left or right a couple of

times. Move the Steam Control from “0” to “MAX” a few times.

Variable Steam Control lever may be set in “self clean” position.

Align the lever to the “0” to “Max” steam setting.

Iron may not be hot enough. Set temperature to “•••” position.

Always allow iron sufﬁcient time to heat up before activating the

variable steam control.

Overuse the steam burst. Allow more time between each burst.

GI435N.ES.130826.2

ONE YEAR LIMITED WARRANTY

EURO-PRO Operating LLC warrants this product to be free from material defects and

workmanship for a period of one (1) year from the date of purchase when utilized for normal

household use, subject to the following conditions, exclusions and exceptions.

The liability of EURO-PRO Operating LLC is limited solely to the cost of the repair or

replacement of the unit at our option. This warranty does not cover normal wear of parts and

does not apply to any unit that has been tampered with or used for commercial purposes.

This limited warranty does not cover damage caused by misuse, abuse, negligent handling

or damage due to faulty packaging or mishandling in transit. This warranty does not cover

damage or defects caused by or resulting from damages from shipping or repairs, service or

alteration to the product or any of its parts, which have been performed by a repair person not

authorized by EURO-PRO Operating LLC.

If your appliance fails to operate properly while in use under normal household conditions

within the warranty period, you may return the complete appliance and accessories with proof

of purchase and date, freight prepaid. For customer service support, call 1-800-798-7398

or visit our website at www.sharkclean.com.

If the appliance is found by EURO-PRO Operating LLC to be defective, in EURO-PRO Operating

LLC’s sole discretion, we will repair or replace it free of charge. Proof of purchase date and

check made payable to EURO-PRO Operating LLC in the amount of $12.95 to cover the cost

of return shipping and handling must be included.

This warranty is extended to the original purchaser of the unit and excludes all other legal,

implied and/or conventional warranties. The responsibility of EURO-PRO Operating LLC if

any, is limited to the speciﬁc obligations expressly assumed by it under the terms of this

Limited Warranty. In no event is EURO-PRO Operating LLC liable for incidental or consequential

damages to anyone of any nature whatsoever. Some states do not permit the exclusion or

limitation of incidental or consequential damages, so the above may not apply to you.

This Limited Warranty gives you speciﬁc legal rights, and you may also have other rights which

vary from state to state or province to province.

*IMPORTANT: Carefully pack item to avoid damage in shipping. Be sure to include proof of

purchase date and to attach a tag to item before packing including your name, complete

address and phone number with a note giving purchase information, model number and what

you believe is the problem with the item. We recommend you insure the package (as damage

in shipping is not covered by your warranty). Mark the outside of your package “ATTENTION

CUSTOMER SERVICE”. We are constantly striving to improve our products, therefore the

speciﬁcations contained herein are subject to change without notice.

SAVE THESE INSTRUCTIONS

CAUTION! TO PREVENT ELECTRIC SHOCK OR OTHER INJURY, before ﬁlling the iron with

water, make sure that the plug is removed from the outlet.

WARNING: Never ﬁll the iron with fabric conditioner, starches or any other solution, as

these will damage the steam mechanism. Do not use contaminated water.

CAUTION! TO AVOID FIRE, never leave iron unattended while it is plugged in.

CAUTION! TO PREVENT ELECTRIC SHOCK, never use the iron in a location where it can

fall or be pulled into water or another liquid. If the iron falls into water or other liquid,

unplug it immediately. DO NOT reach into the water or liquid.

WARNING: Never use scouring pads, abrasive or chemical cleaners, or solvents to clean

the exterior or soleplate of your iron. Doing so will scratch and/or damage the surface.

CAUTION! DO NOT aim iron at face, towards yourself, or anyone else while using or

adjusting steam. Burns or serious injury may occur.

SPECIAL INSTRUCTIONS

1. To avoid a circuit overload, do not operate another high-wattage appliance on the same

circuit.

2. If an extension cord is absolutely necessary, use a 15-ampere cord. Cords rated for less

amperage can result in a risk of ﬁre or electric shock due to overheating. Use care to

arrange the extension cord so it cannot be pulled or be tripped over.

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USING YOUR IRON

When using your iron, basic safety precautions should always be followed, including

the following:

1. Use iron only for its intended use.

2. To protect against risk of electrical shock, do not immerse the iron in water or other

liquids.

3. DO NOT yank cord to disconnect from outlet. Grasp plug and pull to disconnect.

4. DO NOT allow cord to touch hot surfaces. Let iron cool completely before putting away.

Loop cord loosely around iron when storing.

5. Always disconnect iron from electrical outlet when ﬁlling with water, emptying,

or when not in use.

6. DO NOT operate iron with a damaged cord, or after the iron has been dropped or

damaged in any manner. To avoid the risk of electric shock, do not disassemble the

iron. Return to EURO-PRO Operating LLC for examination, repair or adjustment. Incorrect

reassembly can cause the risk of electric shock when the iron is used.

7. IMPORTANT: This appliance is not intended for use by persons (including children) with

reduced physical, sensory or mental capabilities, or lack of experience and knowledge.

Close Supervision is necessary for any appliance being used near children.

DO NOT leave iron unattended while connected or on an ironing board.

8. Burns can occur from touching hot metal parts, hot water or steam. Use caution when

you turn a steam iron upside down; there may be hot water in the reservoir.

9. DO NOT use or stand the iron on an unstable surface.

10. While the iron is hot, never set iron on an unprotected surface - even if it is on its heel rest.

11. Always store your iron standing upright, not on the soleplate. If stored face down, even

the smallest amount of moisture will cause the soleplate to corrode and stain.

12. The iron should always be turned “OFF” before plugging or unplugging the iron from the

outlet.

13. This appliance is for household use only.

1 2

GI435N 55 1

Résumé du contenu

Page 1 - GI435N 55

GI435N 55TECHNICAL SPECIFICATIONS: 120 Volts, 60 Hz., 1600 WattsOWNER’S GUIDE1 Stainless Steel Soleplate2 Water Inlet Door3 Atomizer Spray Butt

Page 2

GI435N 55ESPECIFICACIONES TÉCNICAS: 120 V, 60 Hz, 1600 wattsGUÍA DEL USUARIO1 Base de acero inoxidable2 Tapa del tanque de agua3 Botón atomizado

Commentaires sur ces manuels

Pas de commentaire

Shark GI435 Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Fers à repasser Shark GI435. Shark GI435 User's Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Fers à repasser Shark GI435