Shark CB-353007B Manuel de l'opérateur télécharger pdf (Page 7)

OPERATOR’S MANUAL

PRESSURE WASHER

9.800-086.0 • Rev. 3/09

PRESSURE WASHER

OPERATOR’S MANUAL

ASSEMBLY INSTRUCTIONS

STEP 1: Attach the high pressure

hose to the spray gun using teﬂon

tape on hose threads. Use safety

latch to prevent from opening.

STEP 3: Insert nozzle into coupler.

Release the coupler collar and push

the nozzle until the collar clicks. Pull

the nozzle to make sure it is seated

properly.

STEP 5: Connect the high pressure hose to the outlet

discharge ﬁtting. Push coupler collar forward until secure.

Connect the garden hose to pump water inlet. Inspect

inlets. CAUTION: Do not run the pump without water

or pump damage will result.

STEP 2: Connect garden hose

to the cold water source. Before

installing nozzle, turn on water

supply and run machine, allowing

water to ﬂush through the system

until clear.

Safety

Latch

Spray

Gun

High Pressure

Hose

Nozzle

Coupler

Outlet Fitting

Inlet

Fitting

1 2 3 4 5 6 7 8 9 10 11 12 ... 31 32

Pas de commentaire

Shark CB-353007B Manuel de l'opérateur Page 7